favorite_borderwishlist
shopping_basketcarrello0

Outlet a prezzi incredibili

Fino al 60% di sconto su tantissimi prodotti

Scopri di più
Usato
CRATE VTX212BWY
Wishlist favorite_border

CRATE VTX212BWY

Codice: 1020100025276

 350,00

Trasporto gratuito ordinando questo articolo (Spedizione in Italia)

warning È più economico altrove? mail_outline Consiglia articolo.


check_circle Disponibile

Caratteristiche

WATT RMS:
120W RMS
AMPLIFICATORE:
TRANSISTOR
ALTOPARLANTI:
2X12
CANALI:
3
EFFETTI:
DIGITALI, REVERBERO

Prodotti correlati

Peavey ENVOY110 II

Peavey

ENVOY110 II

check_circle Disponibile
€ 289,00
Dettagli
Wishlist favorite_border
Roland MICRO CUBE GX RED

Roland

MICRO CUBE GX RED

check_circle Disponibile
€ 139,00
Dettagli
Wishlist favorite_border
Mesa Boogie EXPRESS 5:50 - 2X12 - 5/50W - CONI C90 - 2 CANALI

Mesa Boogie

EXPRESS 5:50 - 2X12" - 5/50W - CONI C90 - 2 CANALI

check_circle Disponibile
€ 1.890,00 € 2.129,00
-11% off
Dettagli
Wishlist favorite_border

Dettagli prodotto

Descrizione

1: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument
cable.
SOLO/RHYTHM CHANNELS: High gain channels giving you sounds with serious overdrive.
2: SOLO LED: This LED illuminates when the Solo channel is selected.
3: GAIN: Use this control to adjust the amount of distortion produced by the Solo channel.
4: SHAPE: Use this control to ?dial in? the tone for the Solo channel. Rotating the control counterclockwise
enhances the mid frequencies, while rotating the control clockwise enhances the low and
high frequencies.
5: LEVEL: Use this control to adjust the output level of the Solo channel.
6: SOLO/RHYTHM: Use this switch to select the Solo or Rhythm channel. When this switch is
depressed, the Solo channel is selected. With the switch in the out position, the Rhythm channel is
selected. This switch is active only when the Solo/Rhythm/Clean switch (#13) is depressed.
7: RHYTHM LED: This LED illuminates when the Rhythm channel is selected.
8: GAIN: Use this control to adjust the amount of distortion produced by the Rhythm channel.
9: LOW: Use this control to adjust the low frequency level of the Solo/Rhythm channel.
10: MID: Use this control to adjust the midrange frequency level of the Solo/Rhythm channel.
11: HIGH: Use this control to adjust the high frequency level of the Solo/Rhythm channel.
12: LEVEL: Use this control to adjust the output level of the Rhythm channel.
13: SOLO/RHYTHM/CLEAN SELECT: Use this switch to select the Clean channel or the Solo and
Rhythm channels. With the switch in the out position, the Clean channel is selected. When the switch
is depressed, either the Solo or Rhythm channel is selected, depending on the setting of the
Solo/Rhythm switch (#6).
CLEAN CHANNEL: A normal gain channel designed
17: MID: Use this control to adjust the midrange frequency level of the Clean channel.
18: HIGH: Use this control to adjust the high frequency level of the Clean channel.
19: CD INPUT: Use these RCA jacks to connect the output from a CD player or tape deck to the
amplifier. The signal at these jacks is combined into a mono signal which is sent to the internal power
amp circuit. Use the CD or tape player?s output level control to adjust the signal for the proper mix
with your guitar.
20: MULTI: Use this control to select one of the fifteen ?Multi? digital effects. Complete information
about the DSP effects is on page 7.
21: DELAY: Use this control to select one of the fifteen Delay digital effects. Complete information
about the DSP effects is on page 7.
22: SAVE/TAP: Use this pushbutton to set the tempo of many of the effects by tapping the button
repeatedly in time with the desired tempo. The Save/Tap button is also used to save DSP presets
and to restore the factory default DSP settings. Additional information about the Save/Tap button is
on pages 7 and 8.
23: SAVE/TAP LED: This LED flashes in time with the tempo set by the Save/Tap button (#22), and
serves as a status indicator for certain DSP activities (see page 8).
NOTE: For some of the DSP effects, the Save/Tap LED remains illuminated. The Save/Tap LED does not
illuminate when the DSP knobs are set to the Bypass position.
24. REVERB: Use this control to adjust the amount of digital reverb effect. In its fully counterclockwise
position the signal will be ?dry? (without any reverb). As you rotate the control clockwise the
amount of reverb increases.
25: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of
the switch depressed). The switch illuminates when the power is on.
NOTE: When the amplifier is turned on, the Save/Tap LED flashes for one second before the amplifier is
operational.
26: ELECTRONIC TUNER (cabinet top, not shown): The electronic tuner is active whenever the amplifier is
turned on, providing constant, ?real-time? tuning. The bottom row of LEDs indicate which note (string) is being
tuned. The top row of LEDs provides directional queues to facilitate quick and precise tuning of your instrument.
The indicated note (string) is properly tuned when only the center LED is illuminated.

Opinioni dei clienti (mostra tutte)

05-01-2019
Una piacevole sorpresa...affidabili e veloci, da provare assolutamente!
02-01-2019
Ottimo negozio: cortesia, assortimento, prezzi, velocità.
30-12-2018
Dipendenti gentili e disponibili!
30-12-2018
Molto gentili e consegna veloce
25-12-2018
Ho ordinato un prodotto di cui non avevano la taglia in catalogo. Me l'hanno inserito in modo che potessi ordinarlo e successivamente riceverlo a casa. Non ho idea di che cosa si possa desiderare di più da un negozio. Grazie Mille

Contatto Diretto

Ivano Cavallucci

Ivano Cavallucci
Responsabile Reparto Chitarre - Assistenza Riparazioni in Garanzia
0857996209 - int. 93
ivano@cittadellamusica.org

Andrea Tacconelli

Andrea Tacconelli
Responsabile Reparto Chitarre 
0857996209 - int. 99
andrea@cittadellamusica.org